|Screen Materials||Home > Screen Materials > 3D Materials|
Rigid Glass Substrate: TechScreen 150
Currently, there are three different basic technologies for producing stereoscopic 3D images with projection systems. The categories are “Active Systems” employing liquid crystal shutter glasses, “Passive Infitec Systems” utilizing color combing filters and glasses, and “Passive Polarization” employing either linear or circular polarization filters and glasses. All three of the above systems will require more projector light output power because the filters and eyewear can reduce the screen image brightness by up to eighty percent compared with the same projection system producing 2D images.
Active Systems (No special type projection screen required)
Active systems require a power source for both the projector lens shutters and the eyewear. The LCD shutter glasses are synchronized with the lens shutter which alternates between left and right eye discrete images creating the 3D illusion for the viewer. No special type of projection screen required.
Passive Infitech or SuperAnaglyph (No special type projection screen required)
Infitec stands for interference filter technology. Special interference filters in the glasses and in the projector form the main item of technology and have given it this name. The filters divide the visible color spectrum into six narrow bands - two in the red region, two in the green region, and two in the blue region (called R1, R2, G1, G2, B1 and B2 for the purposes of this description). The R1, G1 and B1 bands are used for one eye image, and R2, G2, B2 for the other eye. The human eye is largely insensitive to such fine spectral differences so this technique is able to generate full-color 3D images with only slight color differences between the two eyes. No special type of projection screen required.
Passive Polarized Systems (Special projection screens required)
Linear and Circular Polarized Systems.
Two images, left eye and right eye, are projected superimposed onto the screen through a set of polarized filters. The left and right eyes are polarized in opposite directions. The viewer wears eyeglasses which also contain a pair of polarizing filters. As each filter only passes the light which is similarly polarized and at the same time, blocks the opposite polarized light, each eye only sees one of the superimposed images and the 3D effect is achieved. Linearly polarized glasses require the viewer to keep his head level, as tilting of the viewing filters will cause the images of the left and right channels to bleed over to the opposite channel. Circular Polarizing Systems allows the viewer to tilt their head without any image bleed from the opposite eye. For front projection, a Silver Screen is required so that polarization is preserved. For rear projection, only certain screen models allow for preservation of the polarization.
Listed below are the Stewart Filmscreen materials that are ideal for passive polarized systems:
Rigid Glass Substrate:
|Home | About Us | Residential | Commercial | Site Map | Contact Us | ©2011 Stewart Filmscreen|