Stewart screens will work beautifully with a wide range of projectors. Image size and projector light output can be matched to the appropriate Stewart fabric, yielding predictable professional results. For the best image, the picture should not be viewed at angles greater than 45 percent off-axis or outside a 90-degree seating cone. The best projection results are obtained in darkened rooms, enhancing black/white contrast and picture resolution. However, there are installations such as residential media rooms, corporate boardrooms and large meeting rooms where a certain amount of ambient light will always be present. In those cases, gray screen technology is most likely the best option. Another solution is to prevent extraneous lighting from being directed at the screen.

Higher lumen output projectors match well with lower gain screen surfaces. Hot spot artifacts are minimized; resolution and viewing angles are increased. Projectors with lower lumen output can be augmented with a quality Stewart high gain screen. Brightness is retrieved and the image emerges even when ambient light control is not optimum. Contact your projector manufacturer for required information pertaining to image size, focal length of lens and ANSI lumen output.

Stewart Filmscreen's front projection surfaces are available in seamless in sizes up to 40 feet by 90 feet. All are available in either fixed frame or retractable models. In addition to the following standard front and rear projection surfaces, Stewart can also custom run specific gains for your individual application (minimum order size 12 feet by 16 feet).

Flexible front projection materials are available with optional Microperf X2 or Cinemaperf when an acoustically transparent screen is required. Most screen surfaces are also available with an optional opaque backing. Stewart front projection surfaces are washable and flame retardant.

Note: In addition to our standard front projection materials, Stewart can custom run specific gains for your individual application (minimum order size 12 ft by 16 ft).

FIREHAWK G3

FireHawk G3 is a flexible front projection screen surface engineered for use with 1080p technology. The G3's ultra-fine optical coating improves uniformity for consistent brightness across the entire screen. FireHawk G3 is optimized to significantly improve contrast ratios, regardless of the projector type. It is a perfect choice for front projection applications where ambient light may be present providing increased black levels, shadow detailing, and superior color saturation

FEATURES:
- Engineered for use with 1080p projection technology
- Re-formulated optical coating allows for enhanced focusing capabilities
- Superior performance in environments with ambient light
- Superb black levels, shadow detailing, and color saturation
- Increased image contrast and resolution
- Superb color and white field uniformity



GRAYHAWK RS G3

GrayHawk RS G3 is an innovative front projection screen surface designed to maximize the performance of today’s 1080p technology. The G3’s ultra-fine optical coating improves uniformity for consistent brightness across the entire screen. This unique feature, combined with the neutral density gray base, dramatically increases black levels, shadow detailing and overall color saturation providing the viewer with maximum resolution and superb image quality. GrayHawk RS G3 is an excellent tool for lowering the black floor with high output projectors, without losing off axis performance and viewing cone width.

FEATURES
- Industry’s first gray-based reference standard screen
- Re-formulated optical coating allows for enhanced focusing capabilities
- Superior performance in environments with ambient light
- Offers superb black levels, shadow detailing, and overall color saturation
- Increased image contrast and resolution
- Certified by THX
- Certified by the Imaging Science Foundation (ISF)



STUDIOTEK 130 G3

StudioTek 130 G3 is a flexible front projection screen material that is formulated to provide optimized white field uniformity unmatched by competing gain screens. StudioTek 130 G3 is over 30% brighter than a matte-white screen surface. Certified by THX, StudioTek 130 G3 is the reference standard projection material within the AV industry.

FEATURES:
- Over 30% brighter than matte-white material
- Studio industry's standard reference screen
- Superb color and white field uniformity
- Certified by THX
- Certified by the Imaging Science Foundation (ISF)



FIREHAWK SST

FireHawk SST is a flexible front projection screen material formulated to dramatically increase black levels, shadow detailing, & color saturation. Sony Electronics approached Stewart to collaborate in the design of this specialized material to optimize the performance of the Sony projectors.

FEATURES:
- Superior performance in environments where ambient light can not be controlled
- Engineered for use with 1080p projection technology
- Extremely smooth and flat surface for better focusing capabilities
- Superb black levels, shadow detailing, and color saturation



ULTRAMATTE 130

UltraMatte 130 is a flexible front projection screen material that is formulated for high output broadcast quality projection systems. The UltraMatte 130 is over 30% brighter than matte-white screen surfaces, producing images with the strictest color fidelity and white field uniformity standards. Ultramatte 130, is available in the largest seamless sizes available in the industry.

FEATURES:
- Over 30% brighter than matte-white screen surfaces
- Extremely smooth and flat surface for better focusing capabilities
- Superb color and white field uniformity
- Superior performance in locations where ambient light can be controlled
- Excellent for use in large-scale applications



ULTRAMATTE 150

UltraMatte 150 is a flexible front projection screen material that is formulated for use in large format applications or when a projector limitation requires a little more punch. UltraMatte 150 is over 50% brighter than matte-white screen surfaces and yet maintains an exemplary viewing cone, particularly when used in long throw cinema applications. The elevated gain of Ultramatte 150 supports large format video presentations and this fabric is commonly used in commercial movie theaters. UltraMatte 150 is available in the largest seamless sizes attainable in the industry.

FEATURES:
- Over 50% brighter than matte-white screen surfaces
- Used in many commercial movie theaters & other large venue applications
- Excellent choice for use with low output projectors
- Superb color and white field uniformity



SNOMATTE 100

SnoMatte 100 is a flexible front projection matte-white screen formulated to meet the strictest color and white field uniformity standards. This low gain material is an optimal diffuser and disperses light in a near perfect hemispherical distribution. SnoMatte 100 is the defacto standard for Digital Intermediary and Color Timing Post Production facilities. The extremely wide viewing cone, necessitates a high degree of commitment to reflected light attenuation in the viewing environment.

FEATURES:
- Excellent for multi-projector edge blending applications
- Matte-white, unity gain reference screen
- Superb color and white field uniformity
- Superior performance in environments where ambient light can be controlled
- Extremely wide viewing cone works well in locations with off axis seating areas



ULTRAMATTE 200

UltraMatte 200, a flexible front projection screen surface that is over 100% brighter than matte-white material. UltraMatte 200 is color corrected for use with CRT’s and works extremely well with slide and film projectors. This high-gain screen surface is an excellent choice for large screen formats.


FEATURES:
- Over 100% brighter than matte-white material
- Higher gain for low output projectors
- Superb color and white field uniformity
- Excellent for use in large-scale applications




GRAYMATTE 70

GrayMatte 70 is a flexible front projection screen material formulated for use in front projection edge blending applications. GrayMatte 70 is a neutral density gray screen surface that dampens cross reflection in deeply curved or circular projection installations. Graymatte 70 is an excellent tool for neutral attenuation of over lit displays employing large high resolution projectors with small screens. Custom gains are available.

FEATURES:
- Formulated for use in edge-blending applications
- Dampens cross reflection in curved or circular installations
- Preserves contrast when using a bright projector on small image area
- Performs excellent where ambient light is not completely controlled
- Extremely wide viewing cone for off axis seating areas