| SILVER 3D (FRONT PROJECTION) | GAIN: 3.0 HALF GAIN: 24° |
|
| Silver 3D, a specialty projection screen fabric designed to optimize stereoscopic, two channel 3D displays. Silver 3D employs special metallic elements, formulated to preserve light polarization. The high gain and high contrast of the fabric help compensate for the losses incurred when using polarization filtration technology. | ||
|
||
 |
||
| Silver 3D offers a wider viewing cone then competing fabrics with similar gain specifications. The open/closed ratio, otherwise known as “ratio of extinction”, of Silver 3D is the industry benchmark for front projection fabrics. In order to produce a high ratio of extinction, special pigmentation and binder chemistry is required. These special ingredients allow the high performance of the fabric, but have impact in the steps required to successfully handle, install, and maintain the fabric. Any hand oil, or soil smudges on this delicate material will be very apparent. It is also a characteristic of Silver 3D that the film is less plasticized than typical Stewart Filmscreen fabrics. A normal plasticization level is found to interfere with the measured ratio of extinction. The binders necessary for the preservation of the optical coating are very high in molecular weight and somewhat stiff as a result. Contact Stewart Filmscreen for more details on this custom material, its applications, and recommended handling. | ||
| NOTICE: Stewart Filmscreen does not recommend the use of Silver 3D screen material with retractable screen models. Due to the aluminized screen finish, there is a high probability of screen laddering, poor lay-flat characteristics and corner wrinkles in the image area. | ||
 |
 |
|
| Specifications are subject to change without notice | ||
| FireHawk G3 |
| FireHawk SST |
| GrayHawk RS |
| SnoMatte 100 |
| StudioTek 130 |
| UltraMatte 130 |
| UltraMatte 150 |
| UltraMatte 200 |
| GrayMatte 70 |
| Silver 3D |
| Microperf X2 |
| Cinemaperf |
| Manuals/Brochures |
| Cleaning Instructions |
